SMC Networks 10/100 manual Gvrp and Bridge Extension Commands, Switchport gvrp, 140

COMMAND LINE INTERFACE

GVRP and Bridge Extension Commands

GARP VLAN Registration Protocol defines a way for switches to exchange VLAN information in order to automatically register VLAN members on interfaces across the network. This section describes how to enable GVRP for individual interfaces and globally for the switch, as well as how to display default configuration settings for the Bridge Extension MIB.

Command	Function	Mode	Page
Interface Commands
switchport gvrp	Enables GVRP for an interface	IC	3-140
switchport forbidden	Configures forbidden VLANs for an	IC	3-130
vlan	interface
show gvrp	Displays GVRP configuration for	NE,	3-141
configuration	selected interface	PE
garp timer	Sets the GARP timer for the selected	IC	3-142
	function
show garp timer	Shows the GARP timer for the	NE,	3-143
	selected function	PE
Global Commands
bridge-ext gvrp	Enables GVRP globally for the	GC	3-144
	switch
show bridge-ext	Shows bridge extension	PE	3-145
	configuration

switchport gvrp

Use this command to enable GVRP for a tagged port. Use the no form to disable it.

Syntax

switchport gvrp no switchport gvrp

3-140