IGMP SNOOPING COMMANDS
Command Usage
The switch must be using IGMPv2 for this command to take effect.
Example
The following shows how to configure the default timeout to 300 seconds:
Console(config)#ip igmp snooping
Related Commands
ip igmp snooping version
ip igmp snooping version
Use this command to configure the IGMP snooping version. Use the no form to restore the default.
Syntax
ip igmp snooping version {1 2} no ip igmp snooping version
•1 - IGMP Version 1
•2 - IGMP Version 2
Default Setting
IGMP Version 2
Command Mode
Global Configuration
Command Usage
•All systems on the subnet must support the same version. If there are legacy devices in your network that only support Version 1, you will also have to configure this switch to use Version 1.
