SMC Networks 10/100 manual Syntax Show interfaces counters interface

COMMAND LINE INTERFACE

Example

Console#show interfaces status ethernet 1/3 Information of Eth 1/3

Basic information:

Port type: 100TX

Mac address: 00-55-FF-FF-DD-E0 Configuration:

Name:

Port admin: Up

Speed-duplex: Auto

Capabilities: 10half, 10full, 100half, 100full,

Broadcast storm: Enabled

Broadcast storm limit: 6 percent

Flow control: Disabled Current status:

Link status: Down

Operation speed-duplex: 10half

Flow control type: None Console#

show interfaces counters

Use this command to display statistics for an interface.

Syntax

show interfaces counters interface

interface

•ethernet unit/port

-unit - This is device 1.

-port - Port number.

•port-channel channel-id(Range: 1-4)

Default Setting

Shows counters for all interfaces.

Command Mode

Normal Exec, Privileged Exec

3-100