SMC Networks 10/100 manual Configuring a Port for Authorization, 105

CONFIGURING 802.1X PORT AUTHENTICATION

Web – Select dot1x, dot1X Configuration. Enable dot1x globally for the switch, modify any of the parameters required, and then click Apply.

CLI – This example enables re-authentication and sets all of the global parameters for dot1x.

Console(config)#dot1x max-req 5	3-46
Console(config)#dot1x re-authentication	3-48
Console(config)#dot1x timeout quiet-period 40	3-49
Console(config)#dot1x timeout re-auth 5	3-49
Console(config)#dot1x timeout tx-period 40	3-50
Console(config)#authentication dot1x default radius	3-45
Console(config)#

Configuring a Port for Authorization

When dot1x is enabled, you need to specify the dot1x authentication mode configured for each port.

Command Attributes

•Status – Indicates if authentication is enabled or disabled on the port.

2-105