SMC Networks 10/100 manual Web Click Port, Port Information or Trunk Information

PORT CONFIGURATION

•MAC Address – The physical layer address for this port.

-CLI only; to access this on the Web, see “Setting the IP Address” on page -11.

•Trunk Member – Shows if port is a trunk member. (Port Information only)

•Creation – Shows if a trunk is manually configured. (Trunk Information only)

•Port Capabilities* – Specifies the capabilities to be advertised for a port during auto-negotiation. The following capabilities are supported:

-10half - Supports 10 Mbps half-duplex operation

-10full - Supports 10 Mbps full-duplex operation

-100half - Supports 100 Mbps half-duplex operation

-100full - Supports 100 Mbps full-duplex operation

-1000full - Supports 1000 Mbps full-duplex operation

-Sym - Transmits and receives pause frames for flow control

-FC - Supports flow control

*To access this item on the Web, see “Configuring Interface Connections” on page -32.

Web – Click Port, Port Information or Trunk Information.

2-31