SMC Networks 10/100 M, 1-6, Setting Passwords

S WITCH M ANAGEMENT
1-6
Setting Passwords
Note: If this is your first time to log into the CLI program, you
should define new passwords for both default user names
using the “username” command, record them and put them
in a safe place.
Passwords can consist of up to 8 alphanumeric characters and are
case sensitive. To prevent unauthorized access to the switch, set
the passwords as follows:
1. Open the console interface with the default user name and
password “admin” to access the Privileged Exec level.
2. Type “configure” and press <Enter>.
3. Type “username guest password 0 password,” for the Normal
Exec level, where password is your new password. Press
<Enter>.
4. Type “username admin password 0 password,” for the
Privileged Exec level, where password is your new password.
Press <Enter>.
Username: admin
Password:
CLI session with the TigerSwitch 10/100 -
6724L2 Managed 24+2 Standalone Switch is opened.
To end the CLI session, enter [Exit].
Console#configure
Console(config)#username guest password 0 [password]
Console(config)#username admin password 0 [password]
Console(config)#