CONFIGURING THE SWITCH
If you download the startup configuration file under a new file name, you can set this file as the startup file at a later time, and then restart the switch.
Console#config | |
Console(config)#boot system config: | |
Console(config)#exit | |
Console#reload | |
|
|
Resetting the System
Web – Click System, Reset. Click the Reset button to restart the switch.
CLI – Use the reload command to restart the switch.
Console#reload | |
System will be | restarted, continue <y/n>? |
|
|
Note: When restarting the system, it will always run the
Displaying Bridge Extension Capabilities
The Bridge MIB includes extensions for managed devices that support Multicast Filtering, Traffic Classes, and Virtual LANs. You can access these extensions to display default settings for the key variables, or to configure the global setting for GARP VLAN Registration Protocol (GVRP).
