SMC Networks 10/100 manual Snmp Commands, Snmp-server community

COMMAND LINE INTERFACE

SNMP Commands

Controls access to this switch from management stations using the Simple Network Management Protocol (SNMP), as well as the error types sent to trap managers.

Command	Function	Mode	Page
snmp-server	Sets up the community access string to	GC	3-54
community	permit access to SNMP commands
snmp-server	Sets the system contact string	GC	3-55
contact
snmp-server	Sets the system location string	GC	3-56
location
snmp-server	Specifies the recipient of an SNMP	GC	3-57
host	notification operation
snmp-server	Enables the device to send SNMP traps or	GC	3-58
enable traps	inform requests (i.e., SNMP notifications)
show snmp	Displays the status of SNMP	NE,	3-59
	communications	PE

snmp-server community

Use this command to define the community access string for the Simple Network Management Protocol. Use the no form to remove the specified community string.

Syntax

snmp-server community string [rorw] no snmp-server community string

•string - Community string that acts like a password and permits access to the SNMP protocol. (Maximum length: 32 characters, case sensitive; Maximum number of strings: 5)

•ro - Specifies read-only access. Authorized management stations are only able to retrieve MIB objects.

3-54