CONFIGURING THE SWITCH
Web – Click Address Table, Static Addresses. Specify the mode, the interface, the MAC address and duration, then click Add Static Address.
CLI – This example adds an address to the static address table, and sets it to permanent by default.
interface ethernet 1/3 | |
Console(config)# |
|
|
|
Displaying the Address Table
The Dynamic Address Table contains the MAC addresses learned by monitoring the source address for traffic entering the switch. When the destination address for inbound traffic is found in the database, the packets intended for that address are forwarded directly to the associated port. Otherwise, the traffic is flooded to all ports.
