C
OMMAND
L
INE
I
NTERFACE
3-112spanning-tree
Use this command to enable the Spanning Tree Algorithm globally
for the switch. Use the no form to disable it.
Syntax
spanning-tree
no spanning-tree
Default Setting
Spanning tree is enabled.
Command Mode
Global Configuration
Command Usage
The Spanning Tree Algorithm (STA) can be used to detect and
disable network loops, and to provide backup links between
switches, bridges or routers. This allows the switch to interact
with other bridging devices (that is, an STA-compliant switch,
bridge or router) in your network to ensure that only one route
exists between any two stations on the network, and provide
backup links which automatically take over when a primary
link goes down.
spanning-tree
portfast
Sets an interface to fast forwarding IC 3-118
show
spanning-tree
Shows spanning tree configuration for
the overall bridge or a selected
interface
PE 3-119
Command Function Mode Page