E
NTERING
C
OMMANDS
3-9
• Interface Configuration - These commands modify the port
configuration such as speed-duplex and negotiation.
• Line Configuration - These commands modify the console port
and Telnet configuration, and include command such as parity
and databits.
• VLAN Configuration - Includes the command to create VLAN
groups.
To enter the Global Configuration mode, enter the command
configure in Privileged Exec mode. The system prompt will
change to “Console(config)#” which gives you access privilege to
all Global Configuration commands.
To enter the other modes, at the configuration prompt type one of
the following commands. Use the exit or end command to retur n
to the Privileged Exec mode.
For example, you can use the following commands to enter
interface configuration mode, and then return to Privileged Exec
mode
Console#configure
Console(config)#
Mode Command Prompt Page
Interface interface {ethernet port |
port-channel id| vlan id}
Console(config-if)# 3-86
Line line {console | vty} Console(config-line)# 3-61
VLAN vlan database Console(config-vlan) 3-121
Console(config)#interface ethernet 1/5
.
.
.
Console(config-if)#exit
Console(config)#