ENGLISH

LEARNING COMMANDS

If an IR code or a brand is not in the database, you can program RC3200A commands by transmitting IR signals from your existing remote controls to RC3200A's learning eye. To do this, place RC3200A and the device's remote control on a flat surface, 1 to 4 inches (2 to 10 cm) apart.

OK

NO GOOD

Top View

Top View

RC3200A

DVD remote

 

 

control unit

RC3200A

 

Side View

Side View

 

DVD remote

 

RC3200A

control unit

RC3200A

 

 

DVD remote

 

 

control unit

 

1 to 4 inches

 

 

(2 to 10 cm)

 

 

To learn commands from other remote controls, RC3200A has to be in Learn mode. Switching to Learn mode is only possible from a specific device, not from the Device Overview. See “Working with Modes”.

Per device you can learn all soft and hard buttons on the RC3200A, except for:

the Backlight button;

the Page Up and Page Down buttons;

the buttons to navigation bar.

the Status button.

THE LEARN SEQUENCE

1. Set the RC3200A in Use Mode. See “Working with Modes”.

2. Select the device, e.g. DVD, with the buttons you want to learn. The device screen appears.

3. Press and hold the Mode button for 3 seconds. The Mode screen appears.

4. Tap Learn on the Mode screen.

RC3200A is now in Learn Mode. 'Learn' and the label of the selected device appear at the top of the touch screen.

5. Use, if necessary, the Page Up or Page Down button to go to the next button you want to learn.

6. Press the soft or hard button you want to learn on the RC3200A. The Learn label changes to Learning, which means RC3200A is ready to receive commands from an existing remote control.

The RC3200A will wait for 5 seconds to receive an IR code from another remote control.

Note

When a hard button is pressed to learn, there is no on screen feedback to indicate which button is pressed.

7. Press and hold the button on the existing remote control you want to learn to the RC3200A.

When the RC3200A receives an IR code:

You hear a confirmation beep;

The label changes from Learning to OK. The Learn sequence has been successful.

When the RC3200A does not receive an IR code in 5 seconds:

You will hear an error beep;

The label changes from Learning to Failed. The Learn sequence has failed.

RC3200A will return to Learn mode. Return to step 5 of the

Learn sequence to relearn the button.

Tip

You do not have to wait for the OK or Failed to disappear. If you press another button (soft or hard button), the RC3200A Learn sequence immediately goes back to step 5.

8. Go to other pages of the selected device with the Page Up and Page Down buttons.

Repeat steps 6. and 7. until you have copied all the commands of the existing remote control.

9. Press Done when you have finished learning commands to the buttons of your choice.

RC3200A returns to Use Mode. You can try out the new IR codes or select another device to learn.

RECORDING MACROS

A macro allows you to send a sequence of commands using one single button. You can for instance, switch on your TV, turn to a movie channel and prepare your VCR for recording by rewinding the videotape. All this can be done be pressing a single button on your RC3200A.

To record macros, RC3200A has to be in Macro mode.

1. Set the RC3200A in Use Mode. See “Working with Modes”.

2. Press the HOME button. and press the Page Up button once. The HOME screen 2/2 appears.

18

Page 22
Image 22
Marantz SR9200 manual Learning Commands, Recording Macros, Learn Sequence

SR9200 specifications

The Marantz SR9200 is a high-end A/V receiver that stands out in the competitive world of home audio and video equipment. Renowned for its exceptional sound quality, advanced features, and flexibility, it serves as a cornerstone for home theater enthusiasts seeking immersive audio experiences.

One of the main features of the SR9200 is its robust power amplification. The receiver boasts a substantial output, delivering 110 watts per channel across all seven channels, which ensures a rich and dynamic sound performance. This power allows it to drive a variety of speaker configurations, accommodating both small and large setups. The receiver employs a high-current amplifier design that significantly enhances transient response, allowing for crisp and clear audio delivery across all frequencies.

In terms of connectivity, the Marantz SR9200 offers an extensive array of options. It includes multiple HDMI inputs and outputs, supporting 4K passthrough and various audio formats such as Dolby Atmos and DTS:X. This makes it compatible with the latest high-definition video sources and ensures a future-proof setup for streaming and gaming. The HDMI inputs also support HDCP 2.2, enabling compatibility with UHD content.

Another key aspect of the SR9200 is its advanced audio processing capabilities. Utilizing Marantz's proprietary technologies, the receiver is equipped with Audyssey MultEQ XT for automatic room calibration. This feature analyzes the room acoustics and adjusts the audio output for optimal sound quality tailored to the specific environment. Furthermore, the receiver supports various surround formats, creating an enveloping soundstage that enhances movie watching and music listening.

The Marantz SR9200 also features a user-friendly interface, including a graphical user interface (GUI) that simplifies navigation through settings and inputs. The receiver can be controlled via the Marantz app, providing convenience for tech-savvy users.

In summary, the Marantz SR9200 is designed for audiophiles who demand top-tier performance and versatility in their home theater systems. With its powerful amplification, advanced audio technologies, and extensive connectivity options, it delivers an unparalleled audio experience that enriches all forms of entertainment. Whether for movies, music, or gaming, the SR9200 sets a high standard in high-fidelity home audio solutions.