Marantz SR9200 manual English, Component Video Input/Output

ENGLISH

,COMPONENT VIDEO INPUT/OUTPUT

If your DVD player or other device has component video connectors, be sure to connect them to these component video connectors on the SR9200. The SR9200 has four component video input connectors to obtain the color information (Y, CB, CR) directly from the recorded DVD signal or other video component and one component video output connector to output it directly into the matrix decoder of the display device.

By sending the pure DVD component video signal directly, the DVD signal forgoes the extra processing that normally would degrade the image. The result is vastly increased image quality, with incredibly lifelike colors and crisp detail.

Notes:

• This component video output is available to OSD menu system.

.Speaker outputs terminals (for Main

room)

Seven terminals are provided for the front left, front right, front center, surround left, surround right, surround back left, and surround back right speakers.

⁄0Speaker outputs terminals (for Multi room)

Two terminals are provided for the left and right speakers for Multiroom(2nd zone)

Notes:

•Connect the these jacks to the matching + or – terminals on your speakers. When making speaker connections, always make certain to maintain correct polarity by connecting the red (+) terminals on the SR9200 to the red terminals on the speaker and the black (–) terminals on the SR9200 to the black terminals on the speakers.

⁄1AC INLET

Plug the supplied power cord into this AC INLET and then into the power outlet on the wall.

⁄2AC OUTLETS

Connect the AC power cables of components such as a DVD and CD player to these outlets. SWITCHED and UNSWITCHED outlets are provided.

The one marked SWITCHED provides power only when the SR9200 is turned on and is useful for components which you use every time you play your system.

The one marked UNSWITCHED is always live as long as the SR9200 is plugged into a live outlet.

A component connected here may be left on permanently, or may be switched off with its own power switch.

Caution:

•In order to avoid potential turn-off thumps, anything plugged in here should be powered up before the SR9200 is turned on.

⁄3VIDEO IN/OUT (TV, DVD, DSS, LD,

VCR1, VCR2)

These are the video inputs and outputs. There are 6 video inputs and 2 video outputs and each one includes both composite video and S- video configurations. Connect VCRs, LD players, DVD players, and other video components to the video inputs.

S-video sources can be viewed through the S-video outputs, and composite sources can only be viewed through the composite output. The 2 video output channels can be used to be connected to video tape recorders for making recordings.

⁄4AUDIO IN/OUT (CD, TAPE, CD-R, TV,

DVD, DSS, LD, VCR1, VCR2)

These are the analog audio inputs and outputs. There are 9 audio inputs (6 of which are linked to video inputs) and 4 audio outputs (2 of which are linked to video outputs). The audio jacks are nominally labeled for cassette tape decks, compact disc players,DVD players and etc.... The audio inputs and outputs require RCA-type connectors.

⁄57.1 CHANNEL INPUT

By connecting a DVD Audio player, SACD player, or other component that has a multi channel port, you can playback the audio with 5.1 channel or 7.1 channel output.

⁄6RS232C

The RS232C port is to be used in conjunction with an external controller to control the operation of the SR9200 by using an external device.

The RS232C port may also be used in the future to update the operating software of the SR9200 so that it will be able to support new digital audio formats and the like as they are introduced.

⁄7REMOTE CONT. IN/OUT terminals

Connect to a Marantz component equipped with remote control (RC- 5) terminals.

⁄8MULTI ROOM REMOTE IN/OUT terminals

IN: Connect to multi-room remote control device, available from your Marantz dealer.

OUT: Connect to the Marantz component equipped with remote control (RC-5) terminals in another room (Second zone).

⁄9DC TRIGGER output terminals

Connect a device that needs to be triggered by DC under certain conditions (screen, power strip, etc…)

Use the system OSD setup menu to determine the conditions by which these jacks will be active.

Note:

•This output voltage is for (status) control only, It is not sufficient for drive capability.

¤0External IR transmitter terminal

If the SR9200 is located inside a rack or cabinet that will not allow infrared beams to transmit to 2way remote commander, you will need to connect a IR transmitter to this output to be able to use the 2way remote controller.

Then install the remote transmitter in an unblocked location where you can easily receive IR signal.

Note:

• An optional remote transmitter kit is required.

10