IMPORTANT SAFETY

INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.

1.Read Instructions – All the safety and operating instructions should be read before the product is operated.

2.Retain Instructions – The safety and operating instructions should be retained for future reference.

3.Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.

4.Follow Instructions – All operating and use instructions should be followed.

5.Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6.Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7.Water and Moisture – Do not use this product near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8.Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

9.A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10.Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11.Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

12.Grounding or Polarization – This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

AC POLARIZED PLUG

13.Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

14.Protective Attachment Plug – The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug.

15.Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure 1.

16.Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

17.Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

18.Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

19.Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

i

Page 3
Image 3
Marantz SR9200 manual Important Safety Instructions, Read Before Operating Equipment

SR9200 specifications

The Marantz SR9200 is a high-end A/V receiver that stands out in the competitive world of home audio and video equipment. Renowned for its exceptional sound quality, advanced features, and flexibility, it serves as a cornerstone for home theater enthusiasts seeking immersive audio experiences.

One of the main features of the SR9200 is its robust power amplification. The receiver boasts a substantial output, delivering 110 watts per channel across all seven channels, which ensures a rich and dynamic sound performance. This power allows it to drive a variety of speaker configurations, accommodating both small and large setups. The receiver employs a high-current amplifier design that significantly enhances transient response, allowing for crisp and clear audio delivery across all frequencies.

In terms of connectivity, the Marantz SR9200 offers an extensive array of options. It includes multiple HDMI inputs and outputs, supporting 4K passthrough and various audio formats such as Dolby Atmos and DTS:X. This makes it compatible with the latest high-definition video sources and ensures a future-proof setup for streaming and gaming. The HDMI inputs also support HDCP 2.2, enabling compatibility with UHD content.

Another key aspect of the SR9200 is its advanced audio processing capabilities. Utilizing Marantz's proprietary technologies, the receiver is equipped with Audyssey MultEQ XT for automatic room calibration. This feature analyzes the room acoustics and adjusts the audio output for optimal sound quality tailored to the specific environment. Furthermore, the receiver supports various surround formats, creating an enveloping soundstage that enhances movie watching and music listening.

The Marantz SR9200 also features a user-friendly interface, including a graphical user interface (GUI) that simplifies navigation through settings and inputs. The receiver can be controlled via the Marantz app, providing convenience for tech-savvy users.

In summary, the Marantz SR9200 is designed for audiophiles who demand top-tier performance and versatility in their home theater systems. With its powerful amplification, advanced audio technologies, and extensive connectivity options, it delivers an unparalleled audio experience that enriches all forms of entertainment. Whether for movies, music, or gaming, the SR9200 sets a high standard in high-fidelity home audio solutions.