OPERATING AMP & TUNER
To control the SR9200 by your RC3200A, you have to select the device AMP or TUNER on HOME screen.
MAIN
AMP PAGE 1/8
INPUT SELECT 2
AMP PAGE 3/8
ENGLISH
Power on and off buttons
These buttons are used to turn on or off SR9200
Sleep button
This button is used to set the sleep timer. (see page 34)
Night button
This button is used to set night mode. (see page 34)
Display button
This button is used to select the display mode for front display. (see page 39)
Video off button
This button is used to turn off or on the video signal outputs from MONITOR OUT terminals. (see page 39)
Cinema RE-EQ button
This button is used to active the Cinema
OSD button
This button is used to turn on the On Screen Display for general information.
You can find the current condition of SR9200.
INPUT SELECT 1
AMP PAGE 2/8
Tuner, TV, VCR1, DSS, CD, DVD, buttons
These buttons are used for selecting an input source. (see page 33)
7.1 INPUT On/Off buttons
These buttons are used to select 7.1ch Input source. (see page 41)
A/D button
This button is used to select the Auto digital input, fixed digital input or analog input. (see page 39)
ATT button
This button is used to attenuate to analog input signals. (see page 39)
Tape, LD, AUX1, AUX2, VCR2, CD-R
These buttons are used for selecting an input source.(see page 33)
A/D button
This button is used to select the Auto digital input, fixed digital input or analog input.(see page 39)
ATT button
This button is used to attenuate to analog input signals. (see page 39 )
TONE ADJUST
AMP PAGE 4/8
BASS + and –
These buttons are used to adjust the tone of
Treble + and –
These buttons are used to adjust the tone of
Test tone
This button is used to generate the test tone noise signal. You can check the balance of output signal level.
Ch sel.
This button is used to change the test tone noise signal output channel.
Ch. Level + and –
This button is used to adjust the output level of each channel.
13