SURROUND
4 | S URROUND |
| |
S URR . MOD E | : AU T O |
| |
C I N EMA R E - EQ | : O F F | ||
L F E L E V E L |
| : 0 d B | |
S URR | L / R | E F F EC T | : ∗ ∗ ∗ d B |
S URR | BACK | E F F EC T | : ∗ ∗ ∗ d B |
C EN T ER E F F EC T | : ∗ ∗ ∗ d B | ||
S UB W E F F EC T | : ∗ ∗ ∗ d B | ||
MA I N |
|
| E X I T |
|
|
|
|
1. Select “SURROUND” in MAIN SETUP MENU with Up or Down cursor button, and press the OK button.
2. To select a desired content , press Up or Down cursor button.
CINEMA
The tonal balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because film soundtracks were designed to be played back in large movie theater environments. Activating the Cinema
Cinema
The Cinema
LFE LEVEL : Select the output level of the LFE signal included in the Dolby Digital signal or the DTS signal. Select 0dB,
The level is ordinarily set to 0 dB except DTS- Music mode. In the
EFFECT LEVEL
SURR L/R EFFECT: Set the effect level of the Surround speaker between
•If “None” was selected for the Surround speakers setting in the Speaker size, then this setting will not appear.
SURR BACK EFFECT : Set the effect level of the Surround Back speaker between
•If “None” was selected for the Surround back speakers setting in the Speaker size, then this setting will not appear.
CENTER EFFECT : Set the effect level of the center speaker between
•If “None” was selected for the Center speaker setting in the Speaker size, then this setting will not appear.
SUB W EFFECT : Set the effect level of the subwoofer speaker between
•If “None” was selected for the Subwoofer speaker setting in the Speaker size, then this setting will not appear.
Note:
•These effect level set up are available only while in HALL, MATRIX, MOVIE, CS5.1, Multi CH. STEREO.
If you finish the setup in this item, move cursor to “MAIN” with Up or Down cursor buttons and press OK button.
PL2 (PRO LOGIC II) MUSIC PARAMETER
Pro Logic
In this mode, SR9200 includes three controls to
5 P L 2 - MUS I C | PARAME T ER | |
PARAME T ER | : DE F AU L T | |
PANORAMA | : OF F | |
D I MEN S I ON | : | 4 |
CEN T E R W I D TH | : | 0 |
MA I N |
| E X I T |
|
|
|
Select “PRO LOGIC 2” in MAIN SETUP MENU with Up or Down cursor button, and press the OK button.
PARAMETER: Select “DEFAULT” or “CUSTOM” with Left or Right cursor button
If you select “CUSTOM”, you can adjust three parameters as follow
PANORAMA: Select the Panorama mode On or Off with Left or Right cursor button.
Panorama wraps the sound of the front left and right speakers around you for an exciting perspective.
DIMENSION: Set the Dimension level between 0 and 6 level in 1 level interval with Left or Right cursor button. Adjust the soundfield either towards the front or towards the rear.
This can be useful to help achieve a more suitable balance from all the speakers with certain recordings.
CENTER WIDTH: Set the Center width level between 0 and 7 level in 1 level interval with Left or Right cursor button. Center Width allows you to gradually spread the center channel sound into the front left and right speakers.
At its widest setting, all the sound from the center is mixed into the left and right.
This control may help achieve a more spacious sound or a better blend of the front image.
If “None” was selected for the Center speaker setting in the Speaker size, then this setting will not appear.
If you finish the setup in this menu, move cursor to “MAIN” with Up or Down cursor buttons and press OK button.
ENGLISH
31