Marantz SR9200 English, Second Setup Page, Third Setup Page, To Exit Setup Mode, Adjust the Date

1.

2.

SECOND SETUP PAGE

On the second setup page you can adjust:

•the date;

•the time.

1. Tap the Revert button.

A message screen appears to confirm or cancel the revert process.

ENGLISH

Adjust the Date

You can set the year, the month and the day in the date settings. Press “+” to increase or “–” to decrease the value for the year, month and day.

1. Tap “+” or “–” once to adjust the year, month and day one value up or down.

2. Press and hold “+” or “–” to adjust the values for the year and the month more rapidly. The value for the day settings will change per 5 days.

The RC3200A will immediately reflect the date change at the top of the screen.

Adjust the Time

Tap “+” or “–” once to adjust the time 1 minute up or down. Press and hold “+” or “–” to adjust the time more rapidly. The time will increase or decrease per 30 minutes.

The RC3200A will immediately reflect the time change at the top of the screen.

THIRD SETUP PAGE

RC3200A Information

This page contains information that may be important to the dealer in case of a defect.

The following information is displayed on this screen:

•Free memory (in percentage), which gives you an indication on how much memory is left to (further) customize the RC3200A;

•Boot version;

•Application version;

•Configuration file.

Revert

Warning

•When you revert the RC3200A, all customization is lost permanently. You loose all RC3200A settings learned codes and recorded macros.

By tapping the Revert button the RC3200A will be reverted to the default configuration.

Reverting to the original configuration restores the RC3200A to its initial state.

You might have to revert when you notice that scrolling through pages is slowing down. This might be the case when you have added a lot of commands to the RC3200A.

2. Press OK or Cancel.

TO EXIT SETUP MODE

1. Press the Mode button. The Mode screen appears.

2. Tap the Mode button you want to go to.

RC3200A switches to this mode. See also “Working with Modes”.

17