2-1
C
HAPTER
2
C

ONFIGURING

THE

S

WITCH

Using the Web Interface

This switch provides an embedded HTTP Web agent. Using a Web
browser you can configure the switch and view statistics to
monitor network activity. The Web agent can be accessed by any
computer on the network using a standard Web browser (I nternet
Explorer 5.0 or above, or Netscape Navigator 6.2 or above) .
Note: You can also use the Command Line Interface (CLI) to
manage the switch over a serial connection to the console
port or via Telnet. For more information on using the CLI,
refer to “Using the Command Line Interfa ce.”
Prior to accessing the switch from a Web browser, first perform the
following tasks:
1. Configure the switch with a valid IP address, subnet mask, and
default gateway using an out-of-band s erial connection,
BOOTP or DHCP protocol. (See “Setting the IP Address” on
page 2-11.)
2. Set user names and passwords using an out-of-band serial
connection. Access to the Web agent is controlled by the same
user names and passwords as the onboard configuration
program. (See “Configuring the Logon Password” on page
2-15.)
3. After you enter a user name and password, you will have
access to the system configuration program.