SMC Networks 10/100 manual Syntax Ip default-gateway gateway no ip default-gateway

COMMAND LINE INTERFACE

•If the BOOTP or DHCP server has been moved to a different domain, the network portion of the address provided to the client will be based on this new domain.

Example

In the following example, the device is reassigned the same address.

Console(config)#interface vlan 1 Console(config-if)#ip address dhcp Console(config-if)#exit Console#ip dhcp restart Console#show ip interface

IP interface vlan

IP address and netmask: 10.1.0.54 255.255.255.0 on VLAN 1,

and address mode: Dhcp. Console#

Related Commands

ip address (3-80)

ip default-gateway

Use this command to a establish a static route between this device and management stations that exist on another network segment. Use the no form to remove the static route.

Syntax

ip default-gateway gateway no ip default-gateway

gateway - IP address of the default gateway

Default Setting

No static route is established.

Command Mode

Global Configuration

3-82