Reference Manual for the RangeMax 240 Wireless Router WPNT834

Default Factory Settings

When you first receive your WPNT834, the default factory settings are in effect, as shown below. You can restore these defaults with the Factory Default Restore button on the rear panel. After you install the WPNT834 router, use the procedures below to customize any of the settings to better meet your networking needs.

FEATURE

DEFAULT FACTORY SETTINGS

 

 

Wireless Router Radio

Enabled

 

 

Wireless Access List (MAC Filtering)

All wireless stations allowed

 

 

SSID broadcast

Enabled

 

 

SSID

NETGEAR

 

 

802.11b/g RF Channel

11

 

 

Mode

Auto 108

 

 

Authentication Type

Automatic

 

 

WEP

Disabled

 

 

DHCP Server

Enabled

 

 

DHCP range

192.168.1.2 to 192.168.1.254

 

 

How to Set Up and Test Basic Wireless Connectivity

Note: If you use a wireless computer to configure WPA settings, you will be disconnected when you click Apply. Reconfigure your wireless adapter to match the new

settings or access the wireless router from a wired computer to make any further changes.

Follow the instructions below to set up and test basic wireless connectivity. Once you have established basic wireless connectivity, you can enable security settings appropriate to your needs.

1.Log in to the WPNT834 firewall at its default LAN address of http://www.routerlogin.net (or http://192.168.1.1) with its default user name of admin and default password of password, or using whatever LAN address and password you have set up.

4-8

Wireless Configuration

v1.0, November 2005

Page 46
Image 46
NETGEAR WPNT834 manual Default Factory Settings, How to Set Up and Test Basic Wireless Connectivity