Reference Manual for the RangeMax 240 Wireless Router WPNT834

Configuring Static Routes

Static Routes provide additional routing information to your router. Under normal circumstances, the router has adequate routing information after it has been configured for Internet access, and you do not need to configure additional static routes. You must configure static routes only for unusual cases such as multiple routers or multiple IP subnets located on your network.

From the main menu of the browser interface, under Advanced, click on Static Routes to view the Static Routes menu, shown below.

Figure 8-11

To add or edit a Static Route:

1.Click the Add button to open the Add/Edit Menu, shown below.

Figure 8-12

2.Type a route name for this static route in the Route Name box. (This is for identification purposes only.)

8-18

Advanced Configuration of the Router

v1.0, November 2005

Page 97
Image 97
NETGEAR WPNT834 manual Configuring Static Routes