SMC Networks 10/100 manual Private Vlan Commands, 132

COMMAND LINE INTERFACE

Example

The following example shows how to display information for VLAN 1:

Console#show		vlan id 1
VLAN Type		Name	Status	Ports/Channel groups
---- -------		----------- ------		-------------------------------
1	Static	DefaultVlan	Active	Eth1/1	Eth1/2	Eth1/3	Eth1/4
				Eth1/5	Eth1/6	Eth1/7	Eth1/8
				Eth1/9	Eth1/10	Eth1/11	Eth1/12
				Eth1/13	Eth1/14	Eth1/15	Eth1/16
				Eth1/17	Eth1/18	Eth1/19	Eth1/20
				Eth1/21 Eth1/22		Eth1/23	Eth1/24
Console#

Private VLAN Commands

Private VLANs provide port-based security and isolation between ports within the assigned VLAN. This switch supports two types of private VLAN ports: promiscuous, and community ports. A promiscuous port can communicate with all interfaces within a private VLAN. Community ports can only communicate with other ports in their own community VLAN, and with their designated promiscuous ports. This section describes commands used to configure private VLANs.

Command	Function	Mode	Page
Edit Private VLAN Groups
private-vlan	Adds or deletes primary and secondary	VC	3-134
	VLANs
private-vlan	Associates a secondary with a primary	VC	3-135
association	VLAN
Configure Private VLAN Interfaces
switchport mode	Sets an interface to host mode or	IC	3-136
private-vlan	promiscuous mode

3-132