COMMAND LINE INTERFACE
stopbits
Use this command to set the number of the stop bits transmitted per byte. Use the no form to restore the default setting.
Syntax
stopbits {1 2}
•1 - One stop bit
•2 - Two stop bits
Default Setting
1 stop bit
Command Mode
Line Configuration
Example
To specify 2 stop bits, enter this command:
show line
Use this command to display the terminal line's parameters.
Syntax
show line [console vty]
•console - Console terminal line.
•vty - Virtual terminal for remote console access.
Default Setting
Shows all lines
Command Mode
