ADDRESS TABLE SETTINGS
Setting Static Addresses
A static address can be assigned to a specific interface on this switch. Static addresses are bound to the assigned interface and will not be moved. When a static address is seen on another interface, the address will be ignored and will not be written to the address table.
Command Attributes
•Static Address Counts* – The number of manually configured addresses.
•Current Static Address Table – Lists all the static addresses.
•Mode – Indicates if a packet with a destination address matching an entry in the static address table will be forwarded or discarded.
•Interface – Port or trunk associated with the device assigned a static address.
•MAC Address – Physical address of a device mapped to this interface.
•Duration – The address can be set to the following type:
-Permanent - Assignment is permanent, and restored after the switch is reset.
-Delete on Reset - Assignment lasts until the switch is reset.
*Web Only
