Set the ports Connection to INS, Go to Example Settings

4.2 KX-TDA Series PBX Programming for DPT Integration

a)Go to the "Configuration-Extension Port" screen. Follow the procedure below for the extension port which you want to assign as a VM port.

b)Set the port's "Connection" to "OUS".

c)Select the attribute of "DPT Property-Type" to "VM (DPT)".

d)Assign "DPT Property-VM Unit No." and "DPT Property-VM Port No.". Incoming calls will hunt starting at the lowest VM Port number.

e)Click "Apply" to save the changed data.

f)Set the port's "Connection" to "INS".

Note

• The screen shot above is an example of the KX-TDA200.

3.Settings for the trunk features

Select the appropriate trunk feature settings depending on how your customer plans to use the VPS.

•The VPS answers all incoming trunk calls promptly. Go to [Example Settings (1)].

•The VPS answers when the operator does not take the call after a specified time. Go to [Example Settings (2)].

•The VPS answers when an Incoming Call Distribution (ICD) group does not take the call after a specified time.