Panasonic KX-TVM50 installation manual Button Assignment via PC Programming

4.9KX-TA, KX-TD, and KX-TE Series PBX Feature Programming for APT/DPT Integration

3.Enter the programming number. KX-TD500: [8]

KX-TD1232/KX-TD816 G, SL, NE, FR, E, AL: [82]

KX-TD1232/KX-TD816 CE, JT, SA, NL, SP, NZ, RU, PD: [82]

KX-TD1232/KX-TD816 C, BX, HK, X, X-BR, DBX, ML, BXDD: [8]

KX-TDN1232, KX-TD88 CN: [8]

KX-TD612: [82]

KX-TE and KX-TA: [94]

Screen output: VTR

4.Dial the Voice Mail extension number. Screen output: VTR- _ _ _

(_ _ _ = The extension number you entered).

5.Press the STORE button.

6.To exit the Personal Programming mode, press the PROGRAM button or set the MEMORY switch to "SET".

7.Repeat these steps for each telephone.

Conditions: This button must be a CO or DSS/BLF key to be programmed as a VTR button. When all Voice Mail ports are busy and this key is pressed followed by an extension number, the user will hear either a dial tone or a busy tone, depending on the Call Waiting on VM Group setting on the PBX.

4.9.12 Button Assignment via PC Programming

KX-TD500 and KX-TE users can assign buttons via PC programming. Follow the procedure below to assign each button.

KX-TD500

1.Go to "4-2 Extension Line" screen (refer to the screen image in 4.9.6 Live Call Screening Assignment via PC Programming).

2.Select the "Card No." and "Port No." which you are going to program.

3.Click "CO Key" in the upper right corner. "Flexible CO Key" screen (for all CO Keys) displays.

Installation Manual 147