Panasonic KX-TVM50 installation manual KX-TDA Series Feature Programming for DPT Integration

4.3KX-TDA Series Feature Programming for DPT Integration

4.3KX-TDA Series Feature Programming for DPT Integration

The following VPS features are functional on any KX-T7xxx proprietary telephone that is connected to the PBX.

Programming procedures and availability may vary by country/area, software version, etc. Refer to the documentation included with the PBX or consult your dealer for more information.

4.3.1Live Call Screening (LCS) Programming

LCS notifies subscribers when messages are being recorded in their mailboxes. 2 notification methods are available: hands-free or private. Hands-free allows the user to monitor the message as it is being recorded through the speakerphone and, if desired, intercept the call by lifting the handset. Private mode notifies the user (by sounding a tone) when a message is being recorded. By pressing the LCS button, the user can monitor the message and intercept the call by going off-hook. System Programming also determines whether the VPS continues to record after the user intercepts the call.

4.3.2Live Call Screening Password Assignment

To allow the Live Call Screening feature to work at an extension, the extension must have the LCS button lit. To light this button, press the LCS button, then enter the password. This password prevents others from activating the LCS feature and listening to the messages as they are being left. (It is not necessary to enter Personal Programming to activate this feature.) PC programming may also be used to program this feature (see 4.3.6 Live Call Screening Assignment via PC Programming).

Note

•For KX-TDA series PBXs, the term "Live Call Screening Password" used in this section indicates the Extension PIN (Personal Identification Number).

1.Lift the handset or press the SP-PHONEbutton.

2.Enter [799].

3.Enter [1].

Screen output: Enter PIN

4.Enter a password (max. 10 digits), then press [#]. Screen output: Enter PIN Again

5.Re-enterthe password, then press [#].

You will hear a confirmation tone, then a dial tone. Screen output: PIN set

6.Hang up or press the SP-PHONE button.

Installation Manual

105