Belkin 8820NP00425 user manual Alternate Setup Method, sections, User ID, Password, Get IP by DHCP

Alternate Setup Method

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

1.User ID

Provided by your ISP. Enter your PPTP User ID here.

2.Password

Provided by your ISP. Type in your password here.

5.Get IP by DHCP

Select the method of getting your Internet IP address from your ISP server. It depends on your ISP service type. Check this box if your ISP will automatically assign an IP address for you. If you are not sure of this, please contact your ISP’s technical-support hotline. If your ISP provided an IP address for you, enter the information in the following fields.

a. IP Address

3. PPTP Gateway	Provided by your ISP. Enter the IP address here.
Provided by your ISP. Enter your PPTP gateway/service IP address here.
	b. Subnet Mask

4.Idle Time Out

This feature is used to automatically disconnect the Router from your ISP when there is no activity for a specified period of time. For instance, entering “10” into the minute field will cause the Router to disconnect from the Internet after 10 minutes of no Internet activity. This option should be used if you pay for your Internet service by the minute.

Provided by your ISP. Enter the IP address here.

c. Default Gateway

Provided by your ISP. Enter the gateway address here.

Wireless G Router 37