Belkin F5D7234NP4 Knowing your Router, sections, H. Connection to Modem, Gray, J. Power Jack

Knowing your Router

Table of Contents	sections		1	2	3	4	5	6		7		8	9			10
H. Connection to Modem		– Yellow
This port is for connection to your cable or DSL modem. Use the cable that
									(H)		(I)			(J)	(K)
was provided with the Router to connect the modem to this port. Use of a
cable other than the cable supplied with the Router may not work properly.
I. Connections to Computers			– Gray

Connect your wired (non-wireless) computers to these ports. These ports are RJ45, 10/100 auto-negotiation, auto-uplinking ports for standard UTP category 5 or 6 Ethernet cable. The ports are labeled 1 through 4.

J. Power Jack

Connect the included 9V/1A DC power supply to this jack.

K. Reset Button

The “Reset” button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the “Reset” button. Use the restore option in instances where you may have forgotten your login password.

a. Resetting the Router

Push and release the “Reset” button. The lights on the Router will momentarily flash. The “router” light will begin to blink. When the “router” light becomes solid again, the reset is complete.

b. Restoring the Factory Defaults

Press and hold the “Reset” button for at least 10 seconds, then release it. The lights on the Router will momentarily flash. The “router” light will begin to blink. When the “router” light becomes solid again, the reset is complete.

Wireless G Router 10