4.9
4.9.10 Two-way Transfer Button Assignment
For the
PC programming is also available for
1.Enter PITS Programming:
a.While
b.Enter [99]. (This step is not needed for
2.Press the desired FLEXIBLE (CO or DSS/BLF) button that you want to assign as the TWT button.
3.Enter the programming number.
Screen output:
4.Dial the Voice Mail extension number. Screen output:
(_ _ _ = The extension number you entered).
5.Press the STORE button.
6.To exit the Personal Programming mode, press the PROGRAM button or set the MEMORY switch to "SET".
7.Repeat these steps for each telephone.
Conditions: This button must be a CO or DSS/BLF key to be programmed as a TWT button. When all Voice Mail ports are busy and this key is pressed followed by an extension number, the user will hear a warning tone.
4.9.11 Voice Mail Transfer Button Assignment
This feature allows an extension user to transfer calls directly to a mailbox. This is available with both DPT and Inband Integration.
PC programming is also available for
1.Enter PITS Programming:
a.While
b.Enter [99]. (This step is not needed for
2.Press the desired Flexible (CO or DSS/BLF) button that you wish to assign as the VTR button.
