4.7
Extension
group 7
7 
8
15 
16
Extension
group 8
VPS 1
Port 1
Port 2
VPS 2
Port 1
Port 2
From the
a)Enter [130] (for VPS1) or [131] (for VPS2).
b)Press the NEXT button
c)Press the SELECT button
d)To assign 2 jacks, press the SELECT button
To assign 1 jack, skip this step.
e)Press the STORE button.
f)Press END (HOLD).
Conditions: The lowest jack (jack 07 or jack 15) entered here must be connected to Port 1 of the VPS.
To change the current assignment from "Port 7" to "Port 7 & 8", you must first change it to "Disable". Likewise, if you want to change it from "Port 7 & 8" to "Port 7", you must first change it to "Disable". If the current assignment is already "Disable", you can make a change in 1 step. This condition also applies to System Program [131].
When "Port 7 & 8" is selected in program [130], extension jack numbers 07 and 08 will be in extension group 7 automatically. Likewise, when "Port 15 & 16" is selected in program [131], extension jack numbers 15 and 16 will be in extension group 8 automatically. Also the Extension Hunting type is set as "Circular" automatically in each of these 2 extension groups.
5.Select the appropriate trunk feature settings depending on how your customer plans to use the VPS: a) to answer all incoming calls, b) as an operator backup, or c) to only answer calls not answered by user extensions.
Recommended trunk feature settings:
a)If the VPS is answering all incoming calls:
Trunk Mode
