5.2 PBX Settings for Inband Integration
such as modem extensions.
Example: FTXD [hookswitch flash 
dial tone 
dial extn. 
hang up]
•Reconnect Sequence on Busy
Tells the VPS how to return to the caller if the called extension is busy. PBXs differ in how they handle this function. Test from an SLT to determine the sequence.
•Reconnect Sequence on No Answer
Tells the VPS how to return to the caller if the called extension does not answer. PBXs differ in how they handle this function. Test from an SLT to determine the sequence.
•Reconnect Sequence on Refused Call
Tells the VPS how to return to the caller if the called extension's owner has enabled Call Screening to not take the call. PBXs differ in how they handle this function. Test from an SLT to determine the sequence.
•Light-On Sequence for Message Waiting Lamp
This is the dialling sequence that the VPS must use to turn on a message waiting lamp at an extension.
•Light-Off Sequence for Message Waiting Lamp
This is the dialling sequence that the VPS must use to turn off a message waiting lamp at an extension.
•Message Waiting Lamp Retry Time
Specifies the number of times to retry the Message Waiting Lamp
•Message Waiting Lamp Interval Time
Specifies the time between retries for the Message Waiting Lamp
•Call Waiting Sequence
This sequence is carried out by the VPS to perform call waiting when the called extension is busy. PBXs differ in how they handle this function. Test from an SLT to determine the sequence.
•Release Sequence for Call Waiting
This sequence is carried out by the VPS to release call waiting. PBXs differ in how they handle this function. Test from an SLT to determine the sequence.
