Panasonic KX-TVM50 installation manual PBX Interface Parameters, PBX Environment

5.2PBX Settings for Inband Integration

•Call Progress Tone Detection for Inband Mode Specifies whether to detect "Call Progress Tone".

5.2.3PBX Interface Parameters

The following items can be programmed using KX-TVM/NCV Maintenance Console under "System Parameters" by selecting the "Parameters" tab.

PBX Environment

•PBX Type

Specifies the type of PBX which is connected to the VPS.

•Integration Mode

Select "Inband". If PBX type is set to the Panasonic KX-T series, the Inband Signalling parameters are set automatically and should not be altered.

SEQUENCE CODES

D	Disconnect
F	Hookswitch Flash
R	Ring Detection
T	Dial Tone Detection
X	Dial Extension
,	Dialling Pause (default 1 s)
;	Dialling Pause (default 3 s)
0-9, , #	DTMF Tones

•Maximum Extension Number Length

Specifies the maximum number of digits that the connected PBX recognises as an extension number.

•Extension Number of VPS Port

Specifies the extension number for each VPS port on the connected PBX.

Note

•Extension numbers of the VPS ports will automatically be assigned when the PBX type has been changed.

•Operator Transfer Sequence

Tells the VPS how to transfer a call to the operator.

Example: FTX [hookswitch flash dial tone dial (operator) extn.]

•Extension Transfer Sequence

Tells the VPS how to transfer a call to an extension. Example: FTX [hookswitch flash dial tone dial extn.]

•Alternate Extension Transfer Sequence

Tells the VPS how to transfer a call to an extension that belongs to the "Alternate Extension Group". This is useful for extensions that need a special transfer procedure (i.e., blind transfer)

158 Installation Manual