
3.3Starting KX-TVM/NCV Maintenance Console
4.The main window is displayed.
Note
•You can change the display language by clicking "Utility"→"Set Language...", then selecting the desired language and clicking"OK".
•To confirm or change the parameters in the Set Default Parameters window after
changing the display language, click "Utility"→"Default Parameters"→"Set Default".
5.Click "Connect" "USB" from the menu bar, or click "Connect" on the shortcut bar, select "USB" in the Connection Mode dialogue box and click "Next".
Note
•To connect to the VPS via USB, the KX- TVM USB driver must be installed on the PC, as explained above in "Installing KX- TVM/NCV Maintenance Console".
6.Select the VPS as the desired USB device, enter the password (default: 1234), then click "Next".
7.Click "Finish" when the message "Connected!" is displayed.
8.You may now begin programming the VPS. To choose the area you would like to begin programming, click the desired icon in the Shortcuts menu.
Installation Manual
89