Cisco Systems D200 manual DLP-D216 Change the STM-N Card ALS Maintenance Settings, 19-14

Chapter 19 DLPs D200 to D299

DLP- D216 Change the STM-N Card ALS Maintenance Settings

Table 19-1	Link Classes By Network Scope
Network Scope		Displayed Link Classes
ALL		DCC, GCC, OTS, PPC, Server Trail
DWDM		GCC, OTS, PPC
TDM		DCC, PPC, Server Trail

b. Check the check boxes next to the links that you want to display. c. Click OK.

Step 10 Return to your originating procedure (NTP).

DLP-D216 Change the STM-N Card ALS Maintenance Settings

Purpose	This task changes the automatic laser shutdown (ALS) maintenance
	settings for the STM-N cards. This feature is available for STM-64 and
	MRC-12 cards.
Tools/Equipment	None
Prerequisite Procedures	DLP-D60 Log into CTC, page 17-49
Required/As Needed	As needed
Onsite/Remote	Onsite or remote
Security Level	Provisioning or higher

Note For the default values and domains of user-provisionable card settings, refer to the “Network Element Defaults” appendix in the Cisco ONS 15454 SDH Reference Manual.

Step 1 In node view, double-click the STM-N card where you want to change the ALS maintenance settings. Step 2 Click the Maintenance > ALS tabs.

Step 3 Modify any of the settings described in Table 19-2by clicking in the field you want to modify. In some fields you can choose an option from a drop-down list; in others you can type a value or select or deselect a check box. The provisionable parameters are listed in the options column in the table.

	Cisco ONS 15454 SDH Procedure Guide, R7.2
19-14	October 2007