Chapter 19 DLPs D200 to D299

DLP- D251 Set Up or Change Routing Information Protocol

•Retransmit Int (sec)—Sets the time that will elapse before a packet is resent. Five seconds is the default.

•Dead Int (sec)—Sets the number of seconds that will pass while an OSPF router’s packets are not visible before its neighbors declare the router down. Forty seconds is the default.

c.Click OK.

Step 8 After entering ONS 15454 SDH OSPF area data, click Apply.

If you changed the Area ID, the TCC2/TCC2P cards reset, one at a time. The reset takes approximately 10 to 15 minutes. Table 19-4 on page 19-56shows the LED behavior during the TCC2/TCC2P reset.

Step 9 Return to your originating procedure (NTP).

DLP-D251 Set Up or Change Routing Information Protocol

Purpose

This task enables Routing Information Protocol (RIP) broadcasting on the

 

ONS 15454 SDH. Perform this task if you want to include the

 

ONS 15454 SDH in RIP-enabled networks.

Tools/Equipment

None

Prerequisite Procedures

DLP-D60 Log into CTC, page 17-49

 

You need to create a static route to the router adjacent to the

 

ONS 15454 SDH for the ONS 15454 SDH to communicate its routing

 

information to non-DCC-connected nodes.

Required/As Needed

As needed

Onsite/Remote

Onsite or remote

Security Level

Provisioning or higher

Step 1 In node view, click the Provisioning > Network > RIP tabs.

Step 2 Check the RIP Active check box if you are activating RIP.

Step 3 Choose either RIP Version 1 or RIP Version 2 from the drop-down list, depending on which version is supported in your network.

Step 4 Set the RIP metric. The RIP metric can be set to a number between 1 and 15 and represents the number of hops.

Step 5 By default, RIP is set to No Authentication. If the router that the ONS 15454 SDH is connected to requires authentication, complete the following steps. If not, continue with Step 6.

a.Click the No Authentication button.

b.In the Edit Authentication Key dialog box, complete the following:

•Type—ChooseSimple Password.

•Enter Authentication Key—Enter the password.

•Confirm Authentication Key—Enter the same password to confirm it.

c.Click OK.

The authentication button label changes to Simple Password.

 

 

Cisco ONS 15454 SDH Procedure Guide, R7.2

 

 

 

 

 

 

October 2007

 

 

19-59

 

 

 

 

 

Page 58 Page 60
Page 59
Image 59
Cisco Systems D200 manual DLP-D251 Set Up or Change Routing Information Protocol, 19-59
Page 58 Page 60

D200 specifications

Cisco Systems has long been a leader in networking technology, and one of its standout products is the Cisco D200. Designed to meet the demands of modern businesses, the D200 is a versatile and robust device that facilitates seamless connectivity and effective network management.

The Cisco D200 is primarily known for its performance and reliability in various deployment scenarios. It is equipped with dual-band Wi-Fi capabilities, supporting both 2.4 GHz and 5 GHz frequencies. This allows users to optimize their wireless network, reducing interference and providing the flexibility to support a wide range of devices in an increasingly wireless world.

One of the standout features of the D200 is its advanced security protocols. Featuring integrated firewalls and support for VPNs, the device ensures that data remains protected against potential cyber threats. With the rise in remote work and digital collaboration, the D200 provides businesses with secure access control, ensuring that sensitive information is safeguarded from unauthorized access.

Another key characteristic of the D200 is its ease of management. With Cisco's user-friendly interface, network administrators can easily configure and monitor the device. The D200 is also compatible with Cisco's DNA Center, enabling businesses to leverage automation and AI-driven insights to optimize their networks and improve operational efficiency.

Performance-wise, the D200 boasts impressive throughput capabilities, making it suitable for high-traffic environments such as offices and educational institutions. Its robust hardware allows for multiple concurrent connections, ensuring that even during peak usage times, network performance remains uninterrupted. Quality of Service (QoS) features also prioritize critical applications, enhancing the overall user experience.

In terms of scalability, the D200 is designed to grow with a business. Whether an organization is expanding its device fleet or increasing bandwidth demands, the D200 can adapt to these changes without compromising performance. Moreover, ongoing firmware updates from Cisco ensure that the device remains current with the latest technologies and security enhancements.

In summary, the Cisco D200 is an essential tool for any business seeking to enhance its networking capabilities. With its advanced features, secure architecture, and ease of management, it stands out as a reliable choice for organizations looking to future-proof their networking infrastructure. As technology continues to evolve, the D200 remains a stalwart in enabling connectivity and efficiency in the digital age.
Top Page Image Contents