Cisco Systems D200 DLP-D248 Delete VLANs, DLP-D249 Provision IP Settings, 19-53, Click Delete

Chapter 19 DLPs D200 to D299

DLP- D248 Delete VLANs

Step 5 Complete the “NTP-D16 Install STM-N Cards and Connectors” procedure on page 2-7.

Step 6 Return to your originating procedure (NTP).

DLP-D248 Delete VLANs

Purpose	This task removes VLANs from a domain.
Tools/Equipment	None
Prerequisite Procedures	See Chapter 6, “Create Circuits and Low-Order Tunnels” for circuit
	creation procedures.
Required/As Needed	As needed
Onsite/Remote	Onsite or remote
Security Level	Provisioning or higher

Note VLANs in use will not be deleted.

Step 1 From the View menu, choose Go to Network View.

Step 2 From the Tools menu, choose Manage VLANS.

Step 3 In the All VLANs dialog box, click the VLAN that you want to remove.

Step 4 Click Delete.

Step 5 In the confirmation dialog box, click Yes.

Step 6 Return to your originating procedure (NTP).

DLP-D249 Provision IP Settings

Purpose	This task provisions IP settings, which includes the IP address, default
	router, Dynamic Host Configuration Protocol (DHCP) access, firewall
	access, and proxy server settings for an ONS 15454 SDH node.
Tools/Equipment	None
Prerequisite Procedures	DLP-D60 Log into CTC, page 17-49
Required/As Needed	Required
Onsite/Remote	Onsite or remote
Security Level	Superuser

Caution All network changes should be approved by your network (or LAN) administrator.

Step 1 If you are in network view, switch to node view by double-clicking the node you want to turn up on the network map.

	Cisco ONS 15454 SDH Procedure Guide, R7.2
October 2007		19-53