Cisco Systems D200 manual 19-32, Click Next

Chapter 19 DLPs D200 to D299

DLP- D234 Roll the Source or Destination of One Optical Circuit

Figure 19-5 Selecting Single Roll Attributes

Step 6 Click Next.

Step 7 In the Pivot/Fixed Point 1 window, click the square in the graphic image that represents the facility that you want to keep (Figure 19-6).

This facility is the fixed location in the cross-connect involved in the roll process. The identifier appears in the text box below the graphic image. The facility that is not selected is the Roll From path. The Roll From path is deleted after the roll is completed.

Figure 19-6 Selecting a Path

HOP

HOP

VC4-*

VC4-* VC4-*

VC4-*

VC4-*

VC4-*

		HOP
		VC4-*
		134351
	Step 8	Click Next.
	Step 9	In the Select New End Point area, choose the Slot, Port, and VC4 from the drop-down lists to select the
		Roll To facility (Figure 19-7).
	Cisco ONS 15454 SDH Procedure Guide, R7.2
19-32		October 2007