Panasonic KX-TVM50 installation manual KX-TDA Series PBX Programming for Inband Integration

5.3KX-TDA Series PBX Programming for Inband Integration

5.3KX-TDA Series PBX Programming for Inband Integration

DPT Integration is recommended when using the VPS with a KX-TDA series PBX, however, Inband Integration is necessary when the PBX has available SLT ports but no available DPT ports.

The screen shots shown in this section are for the KX-TDA200. Programming procedures and availability may vary by country/area, software version, etc. Refer to the documentation included with the PBX or consult your dealer for more information.

1.Assignment of VM (DTMF) Group

a)Go to the "Groups-VM(DTMF) Group-Group Setting" screen.

b)Assign a floating extension number to the desired VM (DTMF) group.

c)Select AA as the service type.

d)Assign extension numbers to "Extension Number of the SLT Port connected to VM". Incoming calls will hunt starting at the lowest VM Port number.

e)Click "Apply" to save the changed data.

Installation Manual 163