Kenmore 790.3105 manual Getting Started, Setting Clock at Power Up, Preheat Temperature Display

Models: 790.3105

1 36
Download 36 pages 52.19 Kb
Page 13
Image 13
Getting Started

Getting Started

Setting Clock at Power Up

You will be prompted to enter the time of day in the event of a power failure or when you first provide electric power to your appliance.

°When your appliance is first powered up, 12:00 wiii flash in the display.

°Enter the time of day using the numeric key pads and press START to set.

If an invalid time of day is entered, the control will triple beep. Re-enter a valid time of day and press START. If

STOP is pressed your clock will start with the time set for 12:00.

Select the CLOCK Q key to modify the time of day during other situations such as day light savings.

Setting Timer

The timer provided with the oven control serve as extra reminders in the kitchen. When the timer reaches less than 1 minute the display will start to count down in seconds. When the time runs out the active timer will beep, and "End" will be displayed.

The following time settings apply to the timers:

°Min. time: 1 minute

°Max. time: 11 hours 59 minutes

See example below to set the timer for 5 minutes:

1.Press TIMER SET/OFF

2.Enter 5 minutes

3.Press START

To cancel or end the timer, press the TIMER SET/OFF key again.

NOTE: The timer(s) will not affect the cooking process.

To Set Add 1 Minute Feature

The ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the pad is pressed, 1 minute is added to the Timer feature if this feature is already active. If the Timer feature is not active and the pad is pressed, the Timer feature wiil become active and wiil begin counting down from 1 minute. For further information on how to set the Timer feature see Timer instructions above.

Preheat Temperature Display

Once a cooking feature has been started, the control wiii display the actual oven temperature while preheating. Once the oven reaches the oven set temperature, only the oven set temperature will be displayed.

The preheat temperature display is available with the following cooking modes:

*Baize

°Conv Baize

Setting Oven Lockout

The Oven Lockout feature automatically locks the oven door and prevents the oven from being turned on. It does not disable the dock, Timer or the interior oven lights.

See example below to lock the oven.

To lock, press and hold OVEN LOCKOUT for 3 seconds.

To unlock, press and hold OVEN LOCKOUT for 3 seconds.

DOOR LOCKED will flash in the display until the door has finished locking. Once the door has been locked the door lock indicator will turn on. DOOR LOCKED will then stay displayed.

Do not attempt to open the oven door while the door lock indicator is flashing.

13

Page 13
Image 13
Kenmore 790.3105 manual Getting Started, Setting Clock at Power Up, Preheat Temperature Display, Setting Oven Lockout