Before Setting SurFace Controls, Remember | Kenmore 790.3105

Before Setting SurFace Controls

Check Burner Cap Placement Before Operating the Surface Burners

To prevent flare-ups and avoid creation of harmful by- products, do not use the cooktop without aii burner caps property installed to insure proper ignition and gas flame size.

It is very important to be sure that aii surface burner caps and burner grates are property installed and in the correct locations BEFORE operating the cooktop burners.

Remember:

°Always keep surface burner caps in place whenever using a surface burner.

°When placing the burner caps, be sure that all burner caps are seated firmly and rest level on top of burner heads.

°For proper flow of gas and ignition of burners DO NOT aflow spills, food, cleaning agents or any other material to enter the gas orifice port opening.

Round Style Burners

The burner cap lip (See Fig. 1) should fit snug into the center of burner head and rest level. Refer to Figs. 2 & 3 for correct and incorrect burner cap placement. Once in place, you may check the fit by gently sliding the burner cap from side to side (Fig. 4) to be sure it is centered and firmly seated. When the burner cap lip makes contact inside the center

of the burner head you will be able to hear the burner cap click. Please note that the burner cap should NOT move off the center of the burner head when sliding from side to side.

Burner Cap ,_,

Burner Head _

"_

_N Burner Cap Lip

Fig. 1

Correct Burner Cap	Incorrect Burner Cap
Placement	Placement
Fig. 2	Fig. 3

10

Image 10

Kenmore 790.3105 manual Before Setting SurFace Controls, Remember, Incorrect Burner Cap

Contents

English / Espaol Models/Modelos =Color numbe n0mero de color Contents Property damage, personal injury or death Save these instructions for future referenceUser Servicing. Do not repair or replace IMPORTANT iNSTRUCTiONS for Using Clean in the serf-cleaning cycle only the parts Your Oven Product Record Conversion to Liquefied Features at a Glance Your Range includes Arranging Oven Before Setting Oven ControlsOven Vent Location Racks Cookware Material types Using a Wok not suppliedSurface Cookware Recommendations Use Proper Cookware Remember Before Setting SurFace ControlsIncorrect Burner Cap Setting the Regular or Simmer Burners Setting Proper Surface Burner Flame SizeProper 20r3 2and Lor2 Oven Control FunctionsRecommended Rack Position for Broiling, Baking and Roasting Min Preheat Temperature Display Setting Clock at Power UpTo Set Add 1 Minute Feature Setting Oven Lockout Preheat Setting Oven ControlsSetting bake Bake Delay Start with cook time Cook Time Convection Bake For best results Convection Convert Press Conv Convert Convection Roast WeightBenefits of convection roast Broil Setting BrollCook flme Minutes Cakes Breads Warm & Hold TM Meat Probe Proper probe placementTo Set Meat Probe Meat Probe cantd To Set Meat Probe Slow Cook Recipe Recall Example below shows how to cancel the Sabbath mode Sabbath ModeCancelling Sabbath mode Star=k.org Setting Silent Control Operation Setting ClockAdjusting Oven Temperature Setting 12hr Energy Saving Mode What to Expect during Cleaning Before Starting Self-CleanHand Clean Door Remove any excessive spillovers in the oven cavity Press Flex Clean Self-Cleaning CycleFlex Clean Cycle Press Delay Start Control panel Care & CleaningSurface Type Oven interior Cleaning surface burner heads Cleaning the Cooktop and Surface BurnersCleaning burner caps To clean the burner head ignition ports Removing and Replacing the Oven Door To Replace Oven Door Remove the drawer and repeat steps thru Removing and Replacing the Drawer To Remove the DrawerReplacing the Halogen Oven Light Lift up and pull out Oven Baking Faulty installation Fan noise during cooking Soll not completely removed Oven smokes excessivelyCompleted Protection Agreements Master Protection Agreements Your Home Our Home