Panasonic DMC-FZ30GN Setting Date/Time Clock Set, Set date and time, Select D/M/Y, M/D/Y or Y/M/D

Preparation

Setting Date/Time (Clock Set)

∫Initial setting

The clock is not set when the camera is shipped. When you turn the camera on, the following screen appears.

•The screen disappears after about

5 seconds. Turn the camera on again.

PLEASE SET THE CLOCK

CLOCK SET MENU

•When pressing the [MENU] button, the screen shown in step 1 appears.

∫Changing the clock setting

•Press the [MENU] button, select [CLOCK SET] in page 2/4 of the [SETUP] menu (P20) and set the clock in steps 1 and 2.

	SETUP	2/4
BEEP
SHUTTER
VOLUME	LEVEL 3
CLOCK SET
NO.RESET
SELECT	EXIT MENU

1 Set date and time.

CLOCK SET

00 : 00 11. JAN . 2005

D/M/Y

SELECT SET EXIT MENU

2 Select [D/M/Y], [M/D/Y] or [Y/M/D].

CLOCK SET

10:00111.DEC.2005

D/M/Y

SELECT SET EXIT MENU

•Close the menu by pressing the [MENU] button 2 times after finishing the setting.

•Check if the clock setting is correct, after turning the camera off and on.

•When a fully charged battery has been inserted for more than 24 hours, the clock setting is stored (in the camera) for at least 3 months even if the battery is removed. (The storing time may be shorter if the battery is not charged sufficiently.)

If more than 3 months has passed, the clock setting will be lost. In this case, set the clock again.

•You can set the year from 2000 to 2099. The 24-hour system is used.

•When you use a photo printing service, if the date is not set in the camera, it will not be printed, even if the store provides a date printing option to your photo.

•For the date print setting, refer to P104.

•2/1: Select the desired item.

•3/4: Set date and time.

19

VQT0S12