Kenmore 790.3105 manual Product Record, Conversion to Liquefied

Product Record

In this space below, record the date of purchase, model and serial number of your product. You will find the model and serial number printed on the serial plate.

Model No. 790.

Serial No.

Date of purchase

Save these instructions and your sales receipt for future reference.

Serial Plate Location

You will find the model and serial number printed on the serial plate. The serial plate is located along the interior side trim and visible when the oven door is opened.

Remember to record the serial number for future reference.

Serlal Plate Location

Conversion to Liquefied

Petroleum Gas (or L.P.Gas)

This natural gas range is designed to allow for conversion to Liquefied Petroleum (L.P.) Gas.

Only a qualified service agent should perform the L. P. conversion. Contact the local gas provider for conversion. The L. P.Conversion Kit is supplied with this range and is located on the main back of the range. The kit contains installation instructions which must be read before and followed carefully when installing the kit.

To avoid serious injury, any additions, changes or conversions required in order for this appliance

to satisfactorily meet the application needs must be made by a qualified service agent.

Grounding instructions

For personal safety, the cooktop must be properly grounded. For maximum safety, the power cord must be plugged into an electrical outlet that is correctly polarized and properly grounded.

DO NOT Operate the cooktop using a 2-prong adapter or an extension cord. If a 2-prong wall receptacle is the only available outleh it is the personal responsibility of the consumer to have it replaced with a properly grounded

3-prong wall receptacle installed by a qualified electrician. See the installatlon instructions packaged with this cooktop for complete installation and grounding instructions.

This appliance is equipped with a 3-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. DO NOT cut or remove the grounding prong from this plug.

Grounding

type wall

Do not, under any

rece

circumstances, cut,

remove, or bypass

the grounding

prong.

Power supply cord with 3-prong grounding plug

Avoid fire hazard or electrica! shock. DO NOT use an adapter plug, an extension cord, or remove grounding prong from electrical power cord. Failure to follow this warning can cause serious injury, fire or death.