User Preferences

Setting Clock

See the example below to set the clock to 1:30.

1.Press Q.

2.Enter 1:30 to advance to 1:30.

3.Press START to accept or press STOP to reject.

Setting 12 or 24 Hour Mode

The clock display mode allows you to choose between 12 and 24 hour mode. The factory preset clock display mode is 12 hour.

See the example below to change the default mode to 24 hour.

1.Press and hold (_ for 7 seconds until "12Hr dAy" or "24Hr dAy" appear in the display.

2.Press FLEX CLEAN to switch between the 12 and 24 hour mode.

3.Press START to accept or press STOP to reject.

Adjusting Oven Temperature

User preference offset

Your appliance has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature recommendations carefully.

If you feel your oven is too hot or too cool from your baking

experience, the oven temperature may be adjusted to your

liking. The temperature may be increased up to +35°F (+19°C)

or decreased down to -35°F (-19°C) from normal.

See the example below to increase the temperature.

1.Press and hold BAKE for 7 seconds until UPO appear in the display.

2.Enter the desired temperature change using the number pads. FLEX CLEAN can be pressed to lower the temperature.

3.Press START to accept or press STOP to reject.

Setting Silent Control Operation

The silent control operation allows you to control the audio for the oven control. You may turn the audio off: and later return to operating with all the normal audible sounds and alerts.

See the example below when changing the audible settings.

1.Press and hold DELAY START for 7 seconds until BEEP appears in the display.

2.Press FLEX CLEAN to switch between the On and Off:

mode.

3. Press START to accept or press STOP to reject.

Changing Between F° or C °

Your control has the ability to display and set Fahrenheit or

Celsius temperatures. The factory preset temperature display is Fahrenheit.

See the example below to change the default temperature

display to Celsius.

1.Press and hold BROIL for 7 seconds until F or C appear in the display.

2.Press FLEX CLEAN to switch between the F and C mode.

3.Press START to accept or press STOP to reject.

Setting 12hr Energy Saving Mode

The oven control has a factory preset built-in 12 hour energy saving feature that will shut off: the appliance if the oven has been heating for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.

See the example below to turn off: 12 hour energy saving

mode.

1.Press and hold TIMER for 7 seconds until "12Hr OFF" or "StAy On" appear in the display.

2.Press FLEX CLEAN to switch between the "12Hr OFF" or "StAy On" mode.

3.Press START to accept or press STOP to reject.

Restoring Factory Default Settings

When new, your appliance was set with predetermined oven control settings. Over time, the user may make changes to these default settings. The following features or functions have user options or adjustments that may have been changed from the factory default settings:

°12 or 24 hour display mode

°Continuous bake or 12-Hour Energy Savings mode

°Silent or audible control

°Oven temperature display (Fahrenheit or Celsius)

°Oven temperature adjustments

°Aii stored recipes

Please be aware before restoring to factory default

settings that ALL of the above user settings wiii be restored, including any oven temperature offset and any stored recipe information.

1.Press and hold the 7 numeric keypad until acceptance tone sounds (about 6 seconds).

2.Press START. The control wiii reset aii user preference settings back to factory default settings.

25

Page 25
Image 25
Kenmore 790.3105 Setting Clock, Adjusting Oven Temperature, Setting Silent Control Operation, Changing Between F or C