Kenmore 790.3105 manual To Set Meat Probe, Proper probe placement

Setting Oven Controls

Meat Probe

When cooking meat such as roasts, hams or poultry you can use the probe to check the internal temperature without any guesswork. For some foods, especially poultry and roasts, testing the internal temperature is the most effective way of insuring that your food has been properly cooked.

Your oven wiii automatically change from cooking to keep warm once the probe has reached the set temperature.

The following temperature settings apply to the probe function:

°Default: 170°F / 76°C

°Minimum: 130°F / 54°C

°Maximum: 210°F / 99°C

*Use only the probe supplied with your appliance; any other may result in damage to the probe or the appliance.

°Be sure the probe is fully inserted into the probe receptacle. The probe will not work properly until correctly connected.

°Handle the probe carefully when inserting and removing it from the food and the receptacle.

°Do not use tongs to puii the cable when inserting or removing it from the food or the receptacle.

°Defrost your food completely before inserting the probe to avoid damaging probe.

°Never leave or store the probe inside the oven when not

In use,

°To prevent the possibility of burns, carefully unplug the probe using a pot holder.

Fig. 2

Important note:

Changing how the oven reacts after reaching the target temperature must be done before starting the cooking process.

To Set Meat Probe:

1.Prepare the food and properly insert the temperature probe into the food. DO NOT preheat or start cooking before properly inserting the meat probe. The probe should be inserted into the food and receptacle while the oven is still cool.

2.Place the prepared food on the desired oven rack position and slide into the oven.

3.Plug the meat probe into the probe receptacle located on the left front oven cavity top (See Fig. 3 for location of probe receptacle).

Proper probe placement

°Always insert the probe so that the tip rests in the center of the thickest part of the meat. Do not allow the probe to touch bone, fat, gristle or the pan.

For bone-in ham or lamb, insert the probe into the center of the lowest large muscle or joint. For dishes such as meat loaf or casseroles, insert the probe into the center of the food. To find the center of the food visually measure with the probe -Fig. 1-. When cooking fish, insert the probe just above the gill.

°For whole poultry or turkey, insert the probe into the thickest part of the inner thigh, below the leg -Fig. 2-.

I 1/2 _ I

Fig. 1

4.

.

Fig. 3

The oven control detects if the meat probe is correctly plugged in to receptacle and when recognized will illuminate the probe icon in the oven control display.

To set the target temperature press MEAT PROBE keypad once then enter the desired target internaJ temperature using the numeric key pads (default setting

is 170°F/77°C)t. Press START to accept the meat probe target temperature. Close the oven door.

21