Care & Cleaning

Removing and Replacing the Drawer

To Remove the Drawer:

1.Open the drawer to the fully opened position.

2.Locate glide lever on each side of drawer_ pull up on the left glide lever and push down on the right glide lever (See Figure 1).

3.Pull the drawer away from the range.

To Replace the Drawer:

1.Pull the plastic slider to the front of the glide slots on each side of the drawer cavity (See Figure 2).

2.Align the glide on each side of the drawer with the drawer cavity glide slot.

3.Push the drawer into the drawer cavity until glide levers

"click" (approximately 2"). If you do not hear the glide levers _cllck" or the drawer does not feel seated

remove the drawer and repeat steps thru 3.

Pull up lever

Left Glide

finger

Replacing the Halogen Oven Light

The oven lights wiii automatically turn ON when the oven door is opened. The oven lights may also be manually operated by pressing the _ pad.

The oven light bulb is covered with a glass shield. The glass shield can be removed to be cleaned manually or to change oven light. THIS GLASS SHIELD MUST BE IN PLACE WHENEVER THE OVEN IS IN USE.

To replace the llght bulb:

BE SURE THE OVEN IS COOL.

1.Turn the power off: at the main source.

2.Wear a leather-faced glove for protection against possible broken glass.

3.To remove the glass shield0 lift up on side and use force to pull shield out.

4.Replace halogen light appliance bulb taking care not to touch the bulb with your bare fingers. Touching bulb with your skin can leave a film on the bulb that causes it to burn out quickly.

5.Replace glass shield in opposite order and manner of

removal.

Push down

Lift up and pull out.

lever with

finger

Glide

Figure 1

Figure 2

31

Page 31
Image 31
Kenmore 790.3105 manual Removing and Replacing the Drawer To Remove the Drawer, Replacing the Halogen Oven Light