4.5
c)Enter the system number ([0] or [1], master/slave). The PBX displays the ROM version and the date it was created.
2.Set the date and time using System Program [000].
3.Set PBX extension numbering using System Program [003].
4.Assign the Voice Mail port. This program tells the PBX which jack will be connected to the VPS. This allows the PBX to send the proper DPT Integration information to those ports.
Note
•You can assign a maximum of 6 jacks (12 ports) with the
•If you are configuring a
From the
a)Enter [117] (or [126]).
b)Press the NEXT button
c)Enter the jack number
d)Press the STORE button.
e)Press END (HOLD) when finished.
Conditions: Jack 01 cannot be used as a Voice Mail port. A jack programmed as a Manager Extension (System Program [006]) cannot be used in this program.
5.Follow this step if you are setting flexible numbering. If you are not setting flexible numbering, continue from step 6.
Voice Mail Extension Number Assignment is automatically set. Use System Program [118] or [127] to assign an extension number to each Voice Mail port. Because each jack connected to the VPS provides 2 extensions, this enables you to assign extension numbers to each port. You can assign any extension number that is not already assigned to another port. To reach the VPS, users dial these extension numbers. It is not necessary to change the default programming for the extensions 165 and 166 (or 265 and 266).
From the
a)Enter [118] (or [127]).
b)Press the NEXT button 
c)Press the NEXT button
_ _ = the port number you entered in program 117 (or 126)
d)Enter the Extension Number that you want this port to have.
The default extension number for port 1: 165 (or 265); port 2: 166 (or 266)
e)Press the STORE button.
f)Repeat steps c, d, and e until all extension numbers are entered.
