VQT2S62
156
Connecting to other equipment
Select and set the items both on the screen in step 2 of the
“Selecting a single picture and printing it” and in step 3 of the
“Selecting multiple pictures and printing them” procedures.
•When you want to print pictures on a paper size or a layout which is
not supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT]
to [{] and then set the paper size or the layout on the printer. (For
details, refer to the operating instructions of the printer.)
•When [PRINT SET (DPOF)] has been selected, the [PRINT WITHDATE] and
[NUM. OFPRINTS] items are not displayed.
•If the printer does not support date printing, the date cannot be printed on the picture.
•Since the printer’s settings may take precedence over the print with date setting, check the
printer’s print with date setting as well.
•When printing images with a text stamp, please remember to set print with date to [OFF] or the
date will print on top.
•In some printers, the picture date for pictures taken with the aspect ratio set to [ ] will be
printed vertically.
Note
When asking the photo shop to print the pictures
•By stamping the date using [TEXT STAMP] (P136) or setting date printing at the time of the
[PRINT SET] (P143) setting before going to a photo shop, the dates can be pr inted at th e photo
shop.
You can set the number of prints up to 999.
•You can also use the rear dial to set.
Press 3 to select [PRINT START] and then press
[MENU/SET].
•Refer to P156 for the items which can be set before starting to
print the pictures.
•Press [MENU/SET] to cancel printing.
•Disconnect the USB connection cable after printing.
Print Settings
[PRINT WITH DATE]
Item Description of settings
[OFF] Date is not printed.
[ON] Date is printed.
[NUM. OF PRINTS]
OFF
1
CANCEL SELECT SET
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
MENU
MULTI SELECT
OFF
1
CANCEL SELECT
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
MULTI SELECT
EXIT
MENU
DMC-G10KPP-VQT2S62_eng.book 156 ページ ２０１０年４月２３日　金曜日　午後８時０分