135
VQT2S62
Advanced (Playback)
You can add text (comments) to pictures. After text has been registered, it can be included
in prints using [TEXT STAMP] (P136). (Only alphabetic characters and symbols can be
entered.)
Select [TITLE EDIT] on the [PLAYBACK] Mode menu. (P28)Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].Enter the text. (P129)Press [‚] to return to the menu screen.¢
¢The menu screen is automatically restored when [MULTI] is selected.
•Press [MENU/SET] to close the menu.
Note
•To delete the title, erase all the text in the text input screen.
•Text can be scrolled if all of the registered text does not fit on the screen.
•You can print out texts (comments) using the “PHOTOfunSTUDIO” bundled software on the
CD-ROM (supplied).
•You can set up to 50 pictures at one time with [MULTI].
•You cannot use title edit for the following pictures.
–Motion pictures
–Protected pictures
–Pictures taken with [ ], [ ] or [ ]
–Pictures recorded with other equipment
[TITLE EDIT]Select the picture, and then
press [MENU/SET] to set.
•[’] is displayed for pictures with titles
already registered.
[MULTI] setting
Press [DISPLAY] to set (repeat), and
then press [MENU/SET] to set.
[SINGLE] [MULTI]
Press 2/1 to select
the picture. Press 3/4/2/1 to
select the pictures.
•The setting is canceled when [DISPLAY] is pressed again.
DMC-G10KPP-VQT2S62_eng.book 135 ページ ２０１０年４月２３日　金曜日　午後８時０分