VQT2S62
94
Advanced (Recording pictures)
Select this when you want to take pictures at a wedding reception, an indoor party etc.
This allows you to take pictures of people and the background with near real-life
brightness.
∫Technique for Party Mode
•Open the flash. (You can set to [ ] or [ ].)
•We recommend using a tripod and the self-timer for taking pictures .
Note
•The initial setting for [AF MODE] is [š].
This takes pictures of a baby with a healthy complexion. When you use the flash, the light
from it is weaker than usual.
It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can
select to have these appear at the time of playback, or have them stamped on the
recorded image using [TEXT STAMP] (P136).
∫Birthday/Name setting
1Press 3/4 to select [AGE] or [NAME] and then press 1.
2Press 3/4 to select [SET] and then press [MENU/SET].
3Enter the birthday or name.
•When the birthday or name is set, [A GE] or [NAME] is automatically set to [ON].
•If [ON] is selected when the birthday or name has not been registered, the setting screen
appears automatically.
4Press [MENU/SET] to finish.
•You can also use the rear dial to set.
∫To cancel [AGE] and [NAME]
Select the [OFF] setting in step 2 of the “Birthday/Name setting” procedure.
Note
•The age and name can be printed out using the “PHOTOfunSTUDIO ” bundled software on the
CD-ROM (supplied).
•If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
•Intelligent ISO sensitivity control is activated, and maximum ISO sensit ivity level becomes
[ISO400].
•If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the
lower left of the screen for about 5seconds, along with the current date and time.
•If the age is not properly displayed, check the clock and birthday settings.
•The Birthday Setting and Name Setting can be reset with [RESET].
•The initial setting for [AF MODE] is [š].
2 [PARTY]
: [BABY1]/; [BABY2]
Birthday: 2/1: Select the items (year/month/day).
3/4: Setting.
[MENU/SET]: Exit.
Name: For details on how to enter characters, refer to
“Entering Text” on P129.
DMC-G10KPP-VQT2S62_eng.book 94 ページ ２０１０年４月２３日　金曜日　午後８時０分